WiFi Broadcom 4306 не будет подключаться

Некоторое время я боролся за попытку получить Broadcom 4306/2, работающий на старом ноутбуке Dell (Latitude D800).

Моя ситуация очень близка к этой

Решение, упомянутое здесь, похоже, заключается в том, чтобы удалить b43legacy и использовать b43 вместо этого, хотя документы говорят довольно четко, что b43legacy является правильным. Несмотря ни на что, никто не работал на меня.

Я использовал несколько страниц Arch в качестве руководства, хотя я запускаю Debian Squeeze. Это потому, что авторы Arch обычно пишут на более низком уровне, так что вы получите более тонкий контроль над тем, что не так.

Это как своего рода модель отладки и объяснение того, как настроить беспроводной интерфейс.

Для меня это похоже на то, что аппаратное обеспечение работает, и программное обеспечение разговаривает с ним. См. Выход ниже wpa_supplicant. Чип видит правильный SSID AP, поэтому радио работает. Однако он не может ассоциироваться.

Также показаны выходные данные lsmod и modinfo для b43legacy. Если кто-то, кто знает, как читать этот материал, поможет, я был бы благодарен. Я не вижу, как идти вперед.

Андрей

[. . .] Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Authentication with 00:26:b8:f3:f2:20 timed out. ^Z [1]+ Stopped wpa_supplicant -iwlan0 -c<(wpa_passphrase "TELUS5335" "XXXXXXXXXX") -D wext root@mothra:/var/run# kill %1 [1]+ Stopped wpa_supplicant -iwlan0 -c<(wpa_passphrase "TELUS5335" "XXXXXXXXXX") -D wext root@mothra:/var/run# CTRL-EVENT-TERMINATING - signal 15 received [1]+ Done wpa_supplicant -iwlan0 -c<(wpa_passphrase "TELUS5335" "XXXXXXXXXX") -D wext root@mothra:/var/run# wpa_supplicant -iwlan0 -c<(wpa_passphrase "TELUS5335" "XXXXXXXXXX") -D nl80211 -dd Initializing interface 'wlan0' conf '/dev/fd/63' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/dev/fd/63' -> '/dev/fd/63' Reading configuration file '/dev/fd/63' Line: 1 - start of a new network block ssid - hexdump_ascii(len=9): 54 45 4c 55 53 35 33 33 35 TELUS5335 PSK - hexdump(len=32): [REMOVED] Priority group 0 id=0 ssid='TELUS5335' Initializing interface (2) 'wlan0' SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf WEXT: Operstate: linkmode=1, operstate=5 Own MAC address: 00:90:4b:7a:14:73 wpa_driver_nl80211_set_wpa wpa_driver_nl80211_set_key: alg=0 addr=0x80b7d38 key_idx=0 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x80b7d38 key_idx=1 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x80b7d38 key_idx=2 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_key: alg=0 addr=0x80b7d38 key_idx=3 set_tx=0 seq_len=0 key_len=0 nl80211: set_key failed; err=-67 wpa_driver_nl80211_set_countermeasures wpa_driver_nl80211_set_drop_unencrypted RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 5e d6 9f e5 5b d1 58 ea a1 a5 df e1 30 fe 24 25 WPS: Build Beacon and Probe Response IEs WPS: * Version WPS: * Wi-Fi Protected Setup State (0) WPS: * Version WPS: * Wi-Fi Protected Setup State (0) WPS: * Response Type (2) WPS: * UUID-E WPS: * Manufacturer WPS: * Model Name WPS: * Model Number WPS: * Serial Number WPS: * Primary Device Type WPS: * Device Name WPS: * Config Methods (0) WPS: * RF Bands (3) EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED Added interface wlan0 RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Trying to get current scan results first without requesting a new scan to speed up initial association Received scan results (0 BSSes) Cached scan results are empty - not posting Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 0 sec 0 usec Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 10 seconds nl80211: Event message available nl80211: New scan results available Received scan results (1 BSSes) New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1049 len=6 WPS: Unsupported attribute type 0x1049 len=6 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1049 len=6 WPS: Unsupported attribute type 0x1049 len=6 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:26:b8:f3:f2:20 ssid='TELUS5335' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 selected based on RSN IE selected WPA AP 00:26:b8:f3:f2:20 ssid='TELUS5335' Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2 WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00 WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00 WPA: using GTK TKIP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_nl80211_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_nl80211_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RSN: Ignored PMKID candidate without preauth flag RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b19 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b04 len=12 EAPOL: disable timer tick Authentication with 00:26:b8:f3:f2:20 timed out. Added BSSID 00:26:b8:f3:f2:20 into blacklist No keys have been configured - skip key clearing State: ASSOCIATING -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No APs found - clear blacklist and try again Removed BSSID 00:26:b8:f3:f2:20 from blacklist (clear) Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b19 len=8 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b19 len=8 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (1 BSSes) New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1049 len=6 WPS: Unsupported attribute type 0x1049 len=6 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1049 len=6 WPS: Unsupported attribute type 0x1049 len=6 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:26:b8:f3:f2:20 ssid='TELUS5335' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 selected based on RSN IE selected WPA AP 00:26:b8:f3:f2:20 ssid='TELUS5335' Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2 WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00 WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00 WPA: using GTK TKIP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_nl80211_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_nl80211_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RSN: Ignored PMKID candidate without preauth flag RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b19 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b04 len=12 Authentication with 00:26:b8:f3:f2:20 timed out. Added BSSID 00:26:b8:f3:f2:20 into blacklist No keys have been configured - skip key clearing State: ASSOCIATING -> DISCONNECTED wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 EAPOL: External notification - portEnabled=0 EAPOL: External notification - portValid=0 EAPOL: External notification - EAP success=0 Setting scan request: 0 sec 0 usec State: DISCONNECTED -> SCANNING Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No APs found - clear blacklist and try again Removed BSSID 00:26:b8:f3:f2:20 from blacklist (clear) Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b19 len=8 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (0 BSSes) New scan results available Selecting BSS from priority group 0 Try to find WPA-enabled AP Try to find non-WPA AP No suitable AP found. Setting scan request: 5 sec 0 usec RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b19 len=8 Starting AP scan (broadcast SSID) Scan requested (ret=0) - scan timeout 30 seconds nl80211: Event message available nl80211: New scan results available Received scan results (1 BSSes) New scan results available WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1049 len=6 WPS: Unsupported attribute type 0x1049 len=6 WPS: attr type=0x104a len=1 WPS: attr type=0x1044 len=1 WPS: attr type=0x1049 len=6 WPS: Unsupported attribute type 0x1049 len=6 Selecting BSS from priority group 0 Try to find WPA-enabled AP 0: 00:26:b8:f3:f2:20 ssid='TELUS5335' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 selected based on RSN IE selected WPA AP 00:26:b8:f3:f2:20 ssid='TELUS5335' Trying to associate with 00:26:b8:f3:f2:20 (SSID='TELUS5335' freq=2437 MHz) Cancelling scan request WPA: clearing own WPA/RSN IE Automatic auth_alg selection: 0x1 RSN: using IEEE 802.11i/D9.0 WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2 proto 2 WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 0c 00 WPA: set AP RSN IE - hexdump(len=26): 30 18 01 00 00 0f ac 02 02 00 00 0f ac 04 00 0f ac 02 01 00 00 0f ac 02 0c 00 WPA: using GTK TKIP WPA: using PTK CCMP WPA: using KEY_MGMT WPA-PSK WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 02 01 00 00 0f ac 04 01 00 00 0f ac 02 00 00 No keys have been configured - skip key clearing wpa_driver_nl80211_set_drop_unencrypted State: SCANNING -> ASSOCIATING wpa_driver_nl80211_set_operstate: operstate 0->0 (DORMANT) WEXT: Operstate: linkmode=-1, operstate=5 wpa_driver_nl80211_associate Setting authentication timeout: 10 sec 0 usec EAPOL: External notification - EAP success=0 EAPOL: External notification - EAP fail=0 EAPOL: External notification - portControl=Auto RSN: Ignored PMKID candidate without preauth flag RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b19 len=8 RTM_NEWLINK: operstate=0 ifi_flags=0x1003 ([UP]) RTM_NEWLINK, IFLA_IFNAME: Interface 'wlan0' added Wireless event: cmd=0x8b04 len=12 ^Z [1]+ Stopped wpa_supplicant -iwlan0 -c<(wpa_passphrase "TELUS5335" "XXXXXXXXXX") -D nl80211 -dd 

Вот lsmod и modinfo:

 Module Size Used by nls_utf8 908 1 nls_cp437 4489 1 vfat 6562 1 fat 34824 1 vfat usb_storage 31009 1 ppdev 4058 0 lp 5570 0 firewire_sbp2 9603 0 arc4 974 2 ecb 1405 2 b43legacy 91692 0 ch7006 13868 1 snd_intel8x0m 8100 0 snd_intel8x0 19595 1 snd_ac97_codec 79152 2 snd_intel8x0m,snd_intel8x0 nouveau 314668 2 mac80211 123126 1 b43legacy ac97_bus 710 1 snd_ac97_codec ttm 33242 1 nouveau cfg80211 87209 2 b43legacy,mac80211 drm_kms_helper 18545 2 ch7006,nouveau rfkill 10220 1 cfg80211 joydev 6739 0 snd_pcm 47226 3 snd_intel8x0m,snd_intel8x0,snd_ac97_codec drm 112489 5 ch7006,nouveau,ttm,drm_kms_helper i2c_algo_bit 3493 1 nouveau yenta_socket 16403 2 rsrc_nonstatic 7057 1 yenta_socket i2c_core 12763 5 ch7006,nouveau,drm_kms_helper,drm,i2c_algo_bit snd_seq 35375 0 snd_seq_device 3673 1 snd_seq snd_timer 12270 2 snd_pcm,snd_seq video 14605 0 dcdbas 3872 0 led_class 1757 1 b43legacy rng_core 2178 1 b43legacy shpchp 21200 0 parport_pc 15799 1 pci_hotplug 18545 1 shpchp parport 22554 3 ppdev,lp,parport_pc output 1204 1 video snd 34399 9 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_seq_device,snd_timer evdev 5609 13 pcspkr 1207 0 psmouse 44817 0 soundcore 3450 1 snd ac 1636 0 battery 3782 0 button 3598 1 nouveau processor 26283 1 snd_page_alloc 5001 3 snd_intel8x0m,snd_intel8x0,snd_pcm serio_raw 2916 0 usbhid 27928 0 hid 51509 1 usbhid ext4 256629 1 mbcache 3762 1 ext4 jbd2 56091 1 ext4 crc16 1027 1 ext4 sg 19917 0 sr_mod 10770 0 sd_mod 25969 4 crc_t10dif 1012 1 sd_mod cdrom 26435 1 sr_mod ata_generic 2247 0 ssb 33626 1 b43legacy mmc_core 38421 1 ssb ata_piix 17716 1 uhci_hcd 16013 0 thermal 9206 0 firewire_ohci 16705 0 pcmcia 16194 1 ssb tg3 95797 0 libata 115713 2 ata_generic,ata_piix ehci_hcd 28533 0 usbcore 99350 5 usb_storage,usbhid,uhci_hcd,ehci_hcd thermal_sys 9378 3 video,processor,thermal firewire_core 31155 2 firewire_sbp2,firewire_ohci crc_itu_t 1035 1 firewire_core pcmcia_core 20426 4 yenta_socket,rsrc_nonstatic,ssb,pcmcia libphy 11618 1 tg3 scsi_mod 104949 6 usb_storage,firewire_sbp2,sg,sr_mod,sd_mod,libata nls_base 4727 5 nls_utf8,nls_cp437,vfat,fat,usbcore 

 filename: /lib/modules/2.6.32-5-686/kernel/drivers/net/wireless/b43legacy/b43legacy.ko firmware: FW10 license: GPL author: Michael Buesch author: Stefano Brivio author: Martin Langer description: Broadcom B43legacy wireless driver alias: ssb:v4243id0812rev04* alias: ssb:v4243id0812rev02* depends: mac80211,ssb,led-class,cfg80211,rng-core vermagic: 2.6.32-5-686 SMP mod_unload modversions 686 parm: pio:enable(1) / disable(0) PIO mode (int) parm: bad_frames_preempt:enable(1) / disable(0) Bad Frames Preemption (int) parm: fwpostfix:Postfix for the firmware files to load. (string) 

  • медленная ссылка для загрузки с hostapd и драйвером ath9k_htc
  • Как проверить, поддерживает ли Wi-Fi Wifi Hotspot или нет
  • USB WiFi на CentOS7
  • Трудности с подключением к WLAN с помощью wpa_supplicant на системном аварийном диске
  • Невозможно подключиться к беспроводной сети с помощью Ralink MT7601
  • Как связать отдельную станцию ​​с AP Wi-Fi
  • Поддерживает ли режим Realtek RTL8192SU режим точки доступа
  • Проблема с драйвером Debian 9 RTL8188CE WiFi
  • One Solution collect form web for “WiFi Broadcom 4306 не будет подключаться”

    Теперь я начал работать. Проблема заключалась в очень низком усилении антенны. Путем перемещения его от соседних металлических предметов и удержания его сбоку, вверх-вниз и т. Д. Было возможно сделать его ассоциированным и работать нормально. Очень физическое решение технической проблемы. Я думаю, что что-то ниже -80 дБ должно быть подозрительным.

    Linux и Unix - лучшая ОС в мире.