gcc 4.6.3 локальная установка с gmp 5.0.5 mpfr 3.1.1 ошибки

Я пытаюсь установить новую версию gcc (версия g ++) в своем домашнем каталоге на сервере, у меня есть доступ тоже. Этот сервер уже имеет gcc в другом месте (и gmp и т. Д.), Но более старые версии, и я хочу локально установить новые.

Я следовал этому руководству по письму, работая в моем домашнем каталоге. В итоге я загрузил новые tars (gcc, gmp, mpfr, mpc), извлеченные из них, и переместил gmp, mpfr, mpc в каталог источников gcc (чтобы они были тогда названы gmp , mpfr , mpc ). Я потом cd .. из источников, а затем в каталог сборки ( objdir ), и оттуда я запускал configure. Конфигурация проходит через штраф, но затем «make» в конечном итоге возвращает:

 checking for MPFR... yes checking for recent GMP... yes checking for recent MPFR... no configure: error: MPFR version >= 2.4.2 required make[2]: *** [configure-stage1-mpc] Error 1 make[2]: Leaving directory `/home/myusername/gcc-temp/objdir' make[1]: *** [stage1-bubble] Error 2 make[1]: Leaving directory `/home/myusername/gcc-temp/objdir' make: *** [all] Error 2 

Действительно ли это должна быть версия 2.4.2? Это проблема?

Является ли факт, что gcc и т. Д. Уже установлены в других местах? Я установил такие вещи, как LD_LIBRARY_PATH="" чтобы попытаться остановить его в другом месте безрезультатно. Я бы подумал, что с радостью просто использовать mpfr в каталоге источников gcc, хотя, как кажется, все в порядке с помощью gmp, который есть.

Полный config.log :

 This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by configure, which was generated by GNU Autoconf 2.64. Invocation command line was $ /home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local ## --------- ## ## Platform. ## ## --------- ## hostname = erased uname -m = x86_64 uname -r = 2.6.18-308.1.1.el5 uname -s = Linux uname -v = #1 SMP Fri Feb 17 16:51:01 EST 2012 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /opt/streamline/bin PATH: /opt/streamline/sbin PATH: /software/bin PATH: /usr/kerberos/bin PATH: /opt/intel/Compiler/11.1/bin/intel64/ PATH: /opt/absoft/bin PATH: /opt/pgi//linux86-64/9.0/bin PATH: /usr/local/bin PATH: /bin PATH: /usr/bin PATH: /opt/pathscale/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2222: checking build system type configure:2236: result: x86_64-unknown-linux-gnu configure:2283: checking host system type configure:2296: result: x86_64-unknown-linux-gnu configure:2316: checking target system type configure:2329: result: x86_64-unknown-linux-gnu configure:2383: checking for a BSD-compatible install configure:2451: result: /usr/bin/install -c configure:2462: checking whether ln works configure:2484: result: yes configure:2488: checking whether ln -s works configure:2492: result: yes configure:2499: checking for a sed that does not truncate output configure:2563: result: /bin/sed configure:2572: checking for gawk configure:2588: found /bin/gawk configure:2599: result: gawk configure:3913: checking for gcc configure:3929: found /usr/bin/gcc configure:3940: result: gcc configure:4169: checking for C compiler version configure:4178: gcc --version >&5 gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4189: $? = 0 configure:4178: gcc -v >&5 Using built-in specs. Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux Thread model: posix gcc version 4.1.2 20080704 (Red Hat 4.1.2-52) configure:4189: $? = 0 configure:4178: gcc -V >&5 gcc: '-V' option must have argument configure:4189: $? = 1 configure:4178: gcc -qversion >&5 gcc: unrecognized option '-qversion' gcc: no input files configure:4189: $? = 1 configure:4209: checking for C compiler default output file name configure:4231: gcc conftest.c >&5 configure:4235: $? = 0 configure:4272: result: a.out configure:4288: checking whether the C compiler works configure:4297: ./a.out configure:4301: $? = 0 configure:4316: result: yes configure:4323: checking whether we are cross compiling configure:4325: result: no configure:4328: checking for suffix of executables configure:4335: gcc -o conftest conftest.c >&5 configure:4339: $? = 0 configure:4361: result: configure:4367: checking for suffix of object files configure:4389: gcc -c conftest.c >&5 configure:4393: $? = 0 configure:4414: result: o configure:4418: checking whether we are using the GNU C compiler configure:4437: gcc -c conftest.c >&5 configure:4437: $? = 0 configure:4446: result: yes configure:4455: checking whether gcc accepts -g configure:4475: gcc -c -g conftest.c >&5 configure:4475: $? = 0 configure:4516: result: yes configure:4533: checking for gcc option to accept ISO C89 configure:4597: gcc -c -g -O2 conftest.c >&5 configure:4597: $? = 0 configure:4610: result: none needed configure:4688: checking for g++ configure:4704: found /usr/bin/g++ configure:4715: result: g++ configure:4742: checking for C++ compiler version configure:4751: g++ --version >&5 g++ (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4762: $? = 0 configure:4751: g++ -v >&5 Using built-in specs. Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux Thread model: posix gcc version 4.1.2 20080704 (Red Hat 4.1.2-52) configure:4762: $? = 0 configure:4751: g++ -V >&5 g++: '-V' option must have argument configure:4762: $? = 1 configure:4751: g++ -qversion >&5 g++: unrecognized option '-qversion' g++: no input files configure:4762: $? = 1 configure:4766: checking whether we are using the GNU C++ compiler configure:4785: g++ -c conftest.cpp >&5 configure:4785: $? = 0 configure:4794: result: yes configure:4803: checking whether g++ accepts -g configure:4823: g++ -c -g conftest.cpp >&5 configure:4823: $? = 0 configure:4864: result: yes configure:4953: checking for gnatbind configure:4983: result: no configure:5045: checking for gnatmake configure:5075: result: no configure:5094: checking whether compiler driver understands Ada configure:5117: result: no configure:5126: checking how to compare bootstrapped objects configure:5151: result: cmp --ignore-initial=16 $$f1 $$f2 configure:5167: checking for objdir configure:5182: result: .libs configure:5724: checking for PWL_handle_timeout in -lpwl configure:5749: gcc -o conftest -g -O2 conftest.c -lpwl >&5 /usr/bin/ld: cannot find -lpwl collect2: ld returned 1 exit status configure:5749: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char PWL_handle_timeout (); | int | main () | { | return PWL_handle_timeout (); | ; | return 0; | } configure:5758: result: no configure:5772: checking for version 0.11 (revision 0 or later) of PPL configure:5789: gcc -c -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src conftest.c >&5 conftest.c:10:19: error: ppl_c.h: No such file or directory conftest.c: In function 'main': conftest.c:16: error: 'choke' undeclared (first use in this function) conftest.c:16: error: (Each undeclared identifier is reported only once conftest.c:16: error: for each function it appears in.) conftest.c:16: error: expected ';' before 'me' configure:5789: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include "ppl_c.h" | int | main () | { | | #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11 | choke me | #endif | | ; | return 0; | } configure:5793: result: no configure:7214: checking for default BUILD_CONFIG configure:7246: result: bootstrap-debug configure:7736: checking for bison configure:7752: found /usr/bin/bison configure:7763: result: bison -y configure:7784: checking for bison configure:7800: found /usr/bin/bison configure:7811: result: bison configure:7831: checking for gm4 configure:7861: result: no configure:7831: checking for gnum4 configure:7861: result: no configure:7831: checking for m4 configure:7847: found /usr/bin/m4 configure:7858: result: m4 configure:7878: checking for flex configure:7894: found /usr/bin/flex configure:7905: result: flex configure:7926: checking for flex configure:7942: found /usr/bin/flex configure:7953: result: flex configure:7973: checking for makeinfo configure:7989: found /usr/bin/makeinfo configure:8000: result: makeinfo configure:8034: checking for expect configure:8064: result: no configure:8083: checking for runtest configure:8113: result: no configure:8228: checking for ar configure:8244: found /usr/bin/ar configure:8255: result: ar configure:8369: checking for as configure:8385: found /usr/bin/as configure:8396: result: as configure:8510: checking for dlltool configure:8540: result: no configure:8651: checking for ld configure:8667: found /usr/bin/ld configure:8678: result: ld configure:8792: checking for lipo configure:8822: result: no configure:8933: checking for nm configure:8949: found /usr/bin/nm configure:8960: result: nm configure:9074: checking for ranlib configure:9090: found /usr/bin/ranlib configure:9101: result: ranlib configure:9210: checking for strip configure:9226: found /usr/bin/strip configure:9237: result: strip configure:9346: checking for windres configure:9376: result: no configure:9487: checking for windmc configure:9517: result: no configure:9628: checking for objcopy configure:9644: found /usr/bin/objcopy configure:9655: result: objcopy configure:9769: checking for objdump configure:9785: found /usr/bin/objdump configure:9796: result: objdump configure:9949: checking for cc configure:9965: found /usr/bin/cc configure:9976: result: cc configure:10110: checking for c++ configure:10126: found /usr/bin/c++ configure:10137: result: c++ configure:10271: checking for gcc configure:10287: found /usr/bin/gcc configure:10298: result: gcc configure:10427: checking for gcj configure:10443: found /usr/bin/gcj configure:10454: result: gcj configure:10588: checking for gfortran configure:10604: found /usr/bin/gfortran configure:10615: result: gfortran configure:10749: checking for gccgo configure:10779: result: no configure:10840: checking for ar configure:10873: result: no configure:10990: checking for ar configure:11006: found /usr/bin/ar configure:11017: result: ar configure:11070: checking for as configure:11103: result: no configure:11220: checking for as configure:11236: found /usr/bin/as configure:11247: result: as configure:11300: checking for dlltool configure:11333: result: no configure:11450: checking for dlltool configure:11480: result: no configure:11530: checking for ld configure:11563: result: no configure:11680: checking for ld configure:11696: found /usr/bin/ld configure:11707: result: ld configure:11760: checking for lipo configure:11793: result: no configure:11910: checking for lipo configure:11940: result: no configure:11990: checking for nm configure:12023: result: no configure:12140: checking for nm configure:12156: found /usr/bin/nm configure:12167: result: nm configure:12220: checking for objdump configure:12253: result: no configure:12370: checking for objdump configure:12386: found /usr/bin/objdump configure:12397: result: objdump configure:12450: checking for ranlib configure:12483: result: no configure:12600: checking for ranlib configure:12616: found /usr/bin/ranlib configure:12627: result: ranlib configure:12680: checking for strip configure:12713: result: no configure:12830: checking for strip configure:12846: found /usr/bin/strip configure:12857: result: strip configure:12910: checking for windres configure:12943: result: no configure:13060: checking for windres configure:13090: result: no configure:13140: checking for windmc configure:13173: result: no configure:13290: checking for windmc configure:13320: result: no configure:13348: checking where to find the target ar configure:13381: result: host tool configure:13390: checking where to find the target as configure:13423: result: host tool configure:13432: checking where to find the target cc configure:13455: result: just compiled configure:13474: checking where to find the target c++ configure:13500: result: just compiled configure:13519: checking where to find the target c++ for libstdc++ configure:13545: result: just compiled configure:13564: checking where to find the target dlltool configure:13597: result: host tool configure:13606: checking where to find the target gcc configure:13629: result: just compiled configure:13648: checking where to find the target gcj configure:13674: result: just compiled configure:13693: checking where to find the target gfortran configure:13719: result: just compiled configure:13738: checking where to find the target gccgo configure:13774: result: host tool configure:13783: checking where to find the target ld configure:13816: result: host tool configure:13825: checking where to find the target lipo configure:13847: result: host tool configure:13856: checking where to find the target nm configure:13889: result: host tool configure:13898: checking where to find the target objdump configure:13931: result: host tool configure:13940: checking where to find the target ranlib configure:13973: result: host tool configure:13982: checking where to find the target strip configure:14015: result: host tool configure:14024: checking where to find the target windres configure:14057: result: host tool configure:14066: checking where to find the target windmc configure:14099: result: host tool configure:14136: checking whether to enable maintainer-specific portions of Makefiles configure:14145: result: no configure:14178: checking whether -fkeep-inline-functions is supported configure:14197: gcc -c -g -O2 -fkeep-inline-functions conftest.c >&5 configure:14197: $? = 0 configure:14198: result: yes configure:14395: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by config.status, which was generated by GNU Autoconf 2.64. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on lin04.hpc.nottingham.ac.uk config.status:996: creating Makefile ## ---------------- ## ## Cache variables. ## ## ---------------- ## #### ---snip--- #### (cut ac_cv_xxx variables so that the log would fit in the post) acx_cv_cc_gcc_supports_ada=no acx_cv_prog_LN=ln gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' gcc_cv_tool_dirs=/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu:/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.3:/usr/lib/gcc/x86_64-unknown-linux-gnu:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin: gcc_cv_tool_prefix=/home/myusername/opt/gcc-4.6.3 lt_cv_objdir=.libs ## ----------------- ## ## Output variables. ## ## ----------------- ## AR='ar' AR_FOR_BUILD='$(AR)' AR_FOR_TARGET='$(AR)' AS='as' AS_FOR_BUILD='$(AS)' AS_FOR_TARGET='$(AS)' AWK='gawk' BISON='bison' BUILD_CONFIG='bootstrap-debug' CC='gcc' CC_FOR_BUILD='$(CC)' CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' CFLAGS='-g -O2' CFLAGS_FOR_BUILD='-g -O2' CFLAGS_FOR_TARGET='-g -O2' COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm' CONFIGURE_GDB_TK='' CPPFLAGS='' CXX='g++' CXXFLAGS='-g -O2' CXXFLAGS_FOR_BUILD='-g -O2' CXXFLAGS_FOR_TARGET='-g -O2' CXX_FOR_BUILD='$(CXX)' CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' DEBUG_PREFIX_CFLAGS_FOR_TARGET='' DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"' DLLTOOL='dlltool' DLLTOOL_FOR_BUILD='$(DLLTOOL)' DLLTOOL_FOR_TARGET='$(DLLTOOL)' ECHO_C='' ECHO_N='-n' ECHO_T='' EXEEXT='' EXPECT='expect' FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' FLEX='flex' GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' GCC_SHLIB_SUBDIR='' GCJ_FOR_BUILD='$(GCJ)' GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/' GDB_TK='' GFORTRAN_FOR_BUILD='$(GFORTRAN)' GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/' GNATBIND='no' GNATMAKE='no' GOC_FOR_BUILD='$(GOC)' GOC_FOR_TARGET='$(GOC)' INSTALL_DATA='${INSTALL} -m 644' INSTALL_GDB_TK='' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' LD='ld' LDFLAGS='' LDFLAGS_FOR_BUILD='' LD_FOR_BUILD='$(LD)' LD_FOR_TARGET='$(LD)' LEX='flex' LIBOBJS='' LIBS='' LIPO='lipo' LIPO_FOR_TARGET='$(LIPO)' LN='ln' LN_S='ln -s' LTLIBOBJS='' M4='m4' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='makeinfo' NM='nm' NM_FOR_BUILD='$(NM)' NM_FOR_TARGET='$(NM)' OBJCOPY='objcopy' OBJDUMP='objdump' OBJDUMP_FOR_TARGET='$(OBJDUMP)' OBJEXT='o' PACKAGE_BUGREPORT='' PACKAGE_NAME='' PACKAGE_STRING='' PACKAGE_TARNAME='' PACKAGE_URL='' PACKAGE_VERSION='' PATH_SEPARATOR=':' RANLIB='ranlib' RANLIB_FOR_BUILD='$(RANLIB)' RANLIB_FOR_TARGET='$(RANLIB)' RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' RPATH_ENVVAR='LD_LIBRARY_PATH' RUNTEST='runtest' SED='/bin/sed' SHELL='/bin/sh' STRIP='strip' STRIP_FOR_TARGET='$(STRIP)' SYSROOT_CFLAGS_FOR_TARGET='' TOPLEVEL_CONFIGURE_ARGUMENTS='/home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local' WINDMC='windmc' WINDMC_FOR_BUILD='$(WINDMC)' WINDMC_FOR_TARGET='$(WINDMC)' WINDRES='windres' WINDRES_FOR_BUILD='$(WINDRES)' WINDRES_FOR_TARGET='$(WINDRES)' YACC='bison -y' ac_ct_CC='gcc' ac_ct_CXX='g++' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_configargs=' --cache-file=../config.cache '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking' build_configdirs=' libiberty fixincludes' build_cpu='x86_64' build_libsubdir='build-x86_64-unknown-linux-gnu' build_noncanonical='x86_64-unknown-linux-gnu' build_os='linux-gnu' build_subdir='build-x86_64-unknown-linux-gnu' build_tooldir='${exec_prefix}/x86_64-unknown-linux-gnu' build_vendor='unknown' clooginc='' clooglibs='' compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*' config_shell='/bin/sh' configdirs=' intl libiberty zlib libcpp libdecnumber gmp mpfr mpc fixincludes gcc lto-plugin' datadir='${datarootdir}' datarootdir='${prefix}/share' do_compare='cmp --ignore-initial=16 $$f1 $$f2' docdir='${datarootdir}/doc/${PACKAGE}' dvidir='${docdir}' exec_prefix='${prefix}' extra_host_libiberty_configure_flags='--enable-shared' extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/.libs' extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src ' gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp' host='x86_64-unknown-linux-gnu' host_alias='' host_configargs=' --cache-file=./config.cache '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking' host_cpu='x86_64' host_noncanonical='x86_64-unknown-linux-gnu' host_os='linux-gnu' host_subdir='.' host_vendor='unknown' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' oldincludedir='/usr/include' pdfdir='${docdir}' poststage1_ldflags='-static-libstdc++ -static-libgcc' poststage1_libs='' pplinc='' ppllibs='' prefix='/home/myusername/opt/gcc-4.6.3' program_transform_name='s,y,y,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' stage1_cflags='-g -fkeep-inline-functions' stage1_checking='--enable-checking=yes,types' stage1_languages='c,lto' stage1_ldflags='' stage1_libs='' stage2_werror_flag='' sysconfdir='${prefix}/etc' target='x86_64-unknown-linux-gnu' target_alias='' target_configargs='--cache-file=./config.cache --enable-multilib '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking' target_configdirs=' libgcc libgomp libstdc++-v3 libmudflap libssp libquadmath libgfortran boehm-gc libffi zlib libjava libobjc' target_cpu='x86_64' target_noncanonical='x86_64-unknown-linux-gnu' target_os='linux-gnu' target_subdir='x86_64-unknown-linux-gnu' target_vendor='unknown' tooldir='${exec_prefix}/x86_64-unknown-linux-gnu' ## ------------------- ## ## File substitutions. ## ## ------------------- ## alphaieee_frag='/dev/null' host_makefile_frag='/dev/null' ospace_frag='/dev/null' serialization_dependencies='serdep.tmp' target_makefile_frag='/home/myusername/gcc-temp/gcc-4.6.3/config/mt-gnu' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "" #define PACKAGE_TARNAME "" #define PACKAGE_VERSION "" #define PACKAGE_STRING "" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "" #define LT_OBJDIR ".libs/" configure: exit 0 и This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. It was created by configure, which was generated by GNU Autoconf 2.64. Invocation command line was $ /home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local ## --------- ## ## Platform. ## ## --------- ## hostname = erased uname -m = x86_64 uname -r = 2.6.18-308.1.1.el5 uname -s = Linux uname -v = #1 SMP Fri Feb 17 16:51:01 EST 2012 /usr/bin/uname -p = unknown /bin/uname -X = unknown /bin/arch = x86_64 /usr/bin/arch -k = unknown /usr/convex/getsysinfo = unknown /usr/bin/hostinfo = unknown /bin/machine = unknown /usr/bin/oslevel = unknown /bin/universe = unknown PATH: /opt/streamline/bin PATH: /opt/streamline/sbin PATH: /software/bin PATH: /usr/kerberos/bin PATH: /opt/intel/Compiler/11.1/bin/intel64/ PATH: /opt/absoft/bin PATH: /opt/pgi//linux86-64/9.0/bin PATH: /usr/local/bin PATH: /bin PATH: /usr/bin PATH: /opt/pathscale/bin ## ----------- ## ## Core tests. ## ## ----------- ## configure:2222: checking build system type configure:2236: result: x86_64-unknown-linux-gnu configure:2283: checking host system type configure:2296: result: x86_64-unknown-linux-gnu configure:2316: checking target system type configure:2329: result: x86_64-unknown-linux-gnu configure:2383: checking for a BSD-compatible install configure:2451: result: /usr/bin/install -c configure:2462: checking whether ln works configure:2484: result: yes configure:2488: checking whether ln -s works configure:2492: result: yes configure:2499: checking for a sed that does not truncate output configure:2563: result: /bin/sed configure:2572: checking for gawk configure:2588: found /bin/gawk configure:2599: result: gawk configure:3913: checking for gcc configure:3929: found /usr/bin/gcc configure:3940: result: gcc configure:4169: checking for C compiler version configure:4178: gcc --version >&5 gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4189: $? = 0 configure:4178: gcc -v >&5 Using built-in specs. Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux Thread model: posix gcc version 4.1.2 20080704 (Red Hat 4.1.2-52) configure:4189: $? = 0 configure:4178: gcc -V >&5 gcc: '-V' option must have argument configure:4189: $? = 1 configure:4178: gcc -qversion >&5 gcc: unrecognized option '-qversion' gcc: no input files configure:4189: $? = 1 configure:4209: checking for C compiler default output file name configure:4231: gcc conftest.c >&5 configure:4235: $? = 0 configure:4272: result: a.out configure:4288: checking whether the C compiler works configure:4297: ./a.out configure:4301: $? = 0 configure:4316: result: yes configure:4323: checking whether we are cross compiling configure:4325: result: no configure:4328: checking for suffix of executables configure:4335: gcc -o conftest conftest.c >&5 configure:4339: $? = 0 configure:4361: result: configure:4367: checking for suffix of object files configure:4389: gcc -c conftest.c >&5 configure:4393: $? = 0 configure:4414: result: o configure:4418: checking whether we are using the GNU C compiler configure:4437: gcc -c conftest.c >&5 configure:4437: $? = 0 configure:4446: result: yes configure:4455: checking whether gcc accepts -g configure:4475: gcc -c -g conftest.c >&5 configure:4475: $? = 0 configure:4516: result: yes configure:4533: checking for gcc option to accept ISO C89 configure:4597: gcc -c -g -O2 conftest.c >&5 configure:4597: $? = 0 configure:4610: result: none needed configure:4688: checking for g++ configure:4704: found /usr/bin/g++ configure:4715: result: g++ configure:4742: checking for C++ compiler version configure:4751: g++ --version >&5 g++ (GCC) 4.1.2 20080704 (Red Hat 4.1.2-52) Copyright (C) 2006 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. configure:4762: $? = 0 configure:4751: g++ -v >&5 Using built-in specs. Target: x86_64-redhat-linux Configured with: ../configure --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --enable-shared --enable-threads=posix --enable-checking=release --with-system-zlib --enable-__cxa_atexit --disable-libunwind-exceptions --enable-libgcj-multifile --enable-languages=c,c++,objc,obj-c++,java,fortran,ada --enable-java-awt=gtk --disable-dssi --disable-plugin --with-java-home=/usr/lib/jvm/java-1.4.2-gcj-1.4.2.0/jre --with-cpu=generic --host=x86_64-redhat-linux Thread model: posix gcc version 4.1.2 20080704 (Red Hat 4.1.2-52) configure:4762: $? = 0 configure:4751: g++ -V >&5 g++: '-V' option must have argument configure:4762: $? = 1 configure:4751: g++ -qversion >&5 g++: unrecognized option '-qversion' g++: no input files configure:4762: $? = 1 configure:4766: checking whether we are using the GNU C++ compiler configure:4785: g++ -c conftest.cpp >&5 configure:4785: $? = 0 configure:4794: result: yes configure:4803: checking whether g++ accepts -g configure:4823: g++ -c -g conftest.cpp >&5 configure:4823: $? = 0 configure:4864: result: yes configure:4953: checking for gnatbind configure:4983: result: no configure:5045: checking for gnatmake configure:5075: result: no configure:5094: checking whether compiler driver understands Ada configure:5117: result: no configure:5126: checking how to compare bootstrapped objects configure:5151: result: cmp --ignore-initial=16 $$f1 $$f2 configure:5167: checking for objdir configure:5182: result: .libs configure:5724: checking for PWL_handle_timeout in -lpwl configure:5749: gcc -o conftest -g -O2 conftest.c -lpwl >&5 /usr/bin/ld: cannot find -lpwl collect2: ld returned 1 exit status configure:5749: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | | /* Override any GCC internal prototype to avoid an error. | Use char because int might match the return type of a GCC | builtin and then its argument prototype would still apply. */ | #ifdef __cplusplus | extern "C" | #endif | char PWL_handle_timeout (); | int | main () | { | return PWL_handle_timeout (); | ; | return 0; | } configure:5758: result: no configure:5772: checking for version 0.11 (revision 0 or later) of PPL configure:5789: gcc -c -g -O2 -I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src conftest.c >&5 conftest.c:10:19: error: ppl_c.h: No such file or directory conftest.c: In function 'main': conftest.c:16: error: 'choke' undeclared (first use in this function) conftest.c:16: error: (Each undeclared identifier is reported only once conftest.c:16: error: for each function it appears in.) conftest.c:16: error: expected ';' before 'me' configure:5789: $? = 1 configure: failed program was: | /* confdefs.h */ | #define PACKAGE_NAME "" | #define PACKAGE_TARNAME "" | #define PACKAGE_VERSION "" | #define PACKAGE_STRING "" | #define PACKAGE_BUGREPORT "" | #define PACKAGE_URL "" | #define LT_OBJDIR ".libs/" | /* end confdefs.h. */ | #include "ppl_c.h" | int | main () | { | | #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11 | choke me | #endif | | ; | return 0; | } configure:5793: result: no configure:7214: checking for default BUILD_CONFIG configure:7246: result: bootstrap-debug configure:7736: checking for bison configure:7752: found /usr/bin/bison configure:7763: result: bison -y configure:7784: checking for bison configure:7800: found /usr/bin/bison configure:7811: result: bison configure:7831: checking for gm4 configure:7861: result: no configure:7831: checking for gnum4 configure:7861: result: no configure:7831: checking for m4 configure:7847: found /usr/bin/m4 configure:7858: result: m4 configure:7878: checking for flex configure:7894: found /usr/bin/flex configure:7905: result: flex configure:7926: checking for flex configure:7942: found /usr/bin/flex configure:7953: result: flex configure:7973: checking for makeinfo configure:7989: found /usr/bin/makeinfo configure:8000: result: makeinfo configure:8034: checking for expect configure:8064: result: no configure:8083: checking for runtest configure:8113: result: no configure:8228: checking for ar configure:8244: found /usr/bin/ar configure:8255: result: ar configure:8369: checking for as configure:8385: found /usr/bin/as configure:8396: result: as configure:8510: checking for dlltool configure:8540: result: no configure:8651: checking for ld configure:8667: found /usr/bin/ld configure:8678: result: ld configure:8792: checking for lipo configure:8822: result: no configure:8933: checking for nm configure:8949: found /usr/bin/nm configure:8960: result: nm configure:9074: checking for ranlib configure:9090: found /usr/bin/ranlib configure:9101: result: ranlib configure:9210: checking for strip configure:9226: found /usr/bin/strip configure:9237: result: strip configure:9346: checking for windres configure:9376: result: no configure:9487: checking for windmc configure:9517: result: no configure:9628: checking for objcopy configure:9644: found /usr/bin/objcopy configure:9655: result: objcopy configure:9769: checking for objdump configure:9785: found /usr/bin/objdump configure:9796: result: objdump configure:9949: checking for cc configure:9965: found /usr/bin/cc configure:9976: result: cc configure:10110: checking for c++ configure:10126: found /usr/bin/c++ configure:10137: result: c++ configure:10271: checking for gcc configure:10287: found /usr/bin/gcc configure:10298: result: gcc configure:10427: checking for gcj configure:10443: found /usr/bin/gcj configure:10454: result: gcj configure:10588: checking for gfortran configure:10604: found /usr/bin/gfortran configure:10615: result: gfortran configure:10749: checking for gccgo configure:10779: result: no configure:10840: checking for ar configure:10873: result: no configure:10990: checking for ar configure:11006: found /usr/bin/ar configure:11017: result: ar configure:11070: checking for as configure:11103: result: no configure:11220: checking for as configure:11236: found /usr/bin/as configure:11247: result: as configure:11300: checking for dlltool configure:11333: result: no configure:11450: checking for dlltool configure:11480: result: no configure:11530: checking for ld configure:11563: result: no configure:11680: checking for ld configure:11696: found /usr/bin/ld configure:11707: result: ld configure:11760: checking for lipo configure:11793: result: no configure:11910: checking for lipo configure:11940: result: no configure:11990: checking for nm configure:12023: result: no configure:12140: checking for nm configure:12156: found /usr/bin/nm configure:12167: result: nm configure:12220: checking for objdump configure:12253: result: no configure:12370: checking for objdump configure:12386: found /usr/bin/objdump configure:12397: result: objdump configure:12450: checking for ranlib configure:12483: result: no configure:12600: checking for ranlib configure:12616: found /usr/bin/ranlib configure:12627: result: ranlib configure:12680: checking for strip configure:12713: result: no configure:12830: checking for strip configure:12846: found /usr/bin/strip configure:12857: result: strip configure:12910: checking for windres configure:12943: result: no configure:13060: checking for windres configure:13090: result: no configure:13140: checking for windmc configure:13173: result: no configure:13290: checking for windmc configure:13320: result: no configure:13348: checking where to find the target ar configure:13381: result: host tool configure:13390: checking where to find the target as configure:13423: result: host tool configure:13432: checking where to find the target cc configure:13455: result: just compiled configure:13474: checking where to find the target c++ configure:13500: result: just compiled configure:13519: checking where to find the target c++ for libstdc++ configure:13545: result: just compiled configure:13564: checking where to find the target dlltool configure:13597: result: host tool configure:13606: checking where to find the target gcc configure:13629: result: just compiled configure:13648: checking where to find the target gcj configure:13674: result: just compiled configure:13693: checking where to find the target gfortran configure:13719: result: just compiled configure:13738: checking where to find the target gccgo configure:13774: result: host tool configure:13783: checking where to find the target ld configure:13816: result: host tool configure:13825: checking where to find the target lipo configure:13847: result: host tool configure:13856: checking where to find the target nm configure:13889: result: host tool configure:13898: checking where to find the target objdump configure:13931: result: host tool configure:13940: checking where to find the target ranlib configure:13973: result: host tool configure:13982: checking where to find the target strip configure:14015: result: host tool configure:14024: checking where to find the target windres configure:14057: result: host tool configure:14066: checking where to find the target windmc configure:14099: result: host tool configure:14136: checking whether to enable maintainer-specific portions of Makefiles configure:14145: result: no configure:14178: checking whether -fkeep-inline-functions is supported configure:14197: gcc -c -g -O2 -fkeep-inline-functions conftest.c >&5 configure:14197: $? = 0 configure:14198: result: yes configure:14395: creating ./config.status ## ---------------------- ## ## Running config.status. ## ## ---------------------- ## This file was extended by config.status, which was generated by GNU Autoconf 2.64. Invocation command line was CONFIG_FILES = CONFIG_HEADERS = CONFIG_LINKS = CONFIG_COMMANDS = $ ./config.status on lin04.hpc.nottingham.ac.uk config.status:996: creating Makefile ## ---------------- ## ## Cache variables. ## ## ---------------- ## #### ---snip--- #### (cut ac_cv_xxx variables so that the log would fit in the post) acx_cv_cc_gcc_supports_ada=no acx_cv_prog_LN=ln gcc_cv_prog_cmp_skip='cmp --ignore-initial=16 $$f1 $$f2' gcc_cv_tool_dirs=/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/libexec/gcc/x86_64-unknown-linux-gnu:/usr/lib/gcc/x86_64-unknown-linux-gnu/4.6.3:/usr/lib/gcc/x86_64-unknown-linux-gnu:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin/x86_64-unknown-linux-gnu/4.6.3:/home/myusername/opt/gcc-4.6.3/x86_64-unknown-linux-gnu/bin: gcc_cv_tool_prefix=/home/myusername/opt/gcc-4.6.3 lt_cv_objdir=.libs ## ----------------- ## ## Output variables. ## ## ----------------- ## AR='ar' AR_FOR_BUILD='$(AR)' AR_FOR_TARGET='$(AR)' AS='as' AS_FOR_BUILD='$(AS)' AS_FOR_TARGET='$(AS)' AWK='gawk' BISON='bison' BUILD_CONFIG='bootstrap-debug' CC='gcc' CC_FOR_BUILD='$(CC)' CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' CFLAGS='-g -O2' CFLAGS_FOR_BUILD='-g -O2' CFLAGS_FOR_TARGET='-g -O2' COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm' CONFIGURE_GDB_TK='' CPPFLAGS='' CXX='g++' CXXFLAGS='-g -O2' CXXFLAGS_FOR_BUILD='-g -O2' CXXFLAGS_FOR_TARGET='-g -O2' CXX_FOR_BUILD='$(CXX)' CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' DEBUG_PREFIX_CFLAGS_FOR_TARGET='' DEFS='-DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DLT_OBJDIR=\".libs/\"' DLLTOOL='dlltool' DLLTOOL_FOR_BUILD='$(DLLTOOL)' DLLTOOL_FOR_TARGET='$(DLLTOOL)' ECHO_C='' ECHO_N='-n' ECHO_T='' EXEEXT='' EXPECT='expect' FLAGS_FOR_TARGET=' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' FLEX='flex' GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' GCC_SHLIB_SUBDIR='' GCJ_FOR_BUILD='$(GCJ)' GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/' GDB_TK='' GFORTRAN_FOR_BUILD='$(GFORTRAN)' GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/' GNATBIND='no' GNATMAKE='no' GOC_FOR_BUILD='$(GOC)' GOC_FOR_TARGET='$(GOC)' INSTALL_DATA='${INSTALL} -m 644' INSTALL_GDB_TK='' INSTALL_PROGRAM='${INSTALL}' INSTALL_SCRIPT='${INSTALL}' LD='ld' LDFLAGS='' LDFLAGS_FOR_BUILD='' LD_FOR_BUILD='$(LD)' LD_FOR_TARGET='$(LD)' LEX='flex' LIBOBJS='' LIBS='' LIPO='lipo' LIPO_FOR_TARGET='$(LIPO)' LN='ln' LN_S='ln -s' LTLIBOBJS='' M4='m4' MAINT='#' MAINTAINER_MODE_FALSE='' MAINTAINER_MODE_TRUE='#' MAKEINFO='makeinfo' NM='nm' NM_FOR_BUILD='$(NM)' NM_FOR_TARGET='$(NM)' OBJCOPY='objcopy' OBJDUMP='objdump' OBJDUMP_FOR_TARGET='$(OBJDUMP)' OBJEXT='o' PACKAGE_BUGREPORT='' PACKAGE_NAME='' PACKAGE_STRING='' PACKAGE_TARNAME='' PACKAGE_URL='' PACKAGE_VERSION='' PATH_SEPARATOR=':' RANLIB='ranlib' RANLIB_FOR_BUILD='$(RANLIB)' RANLIB_FOR_TARGET='$(RANLIB)' RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' RPATH_ENVVAR='LD_LIBRARY_PATH' RUNTEST='runtest' SED='/bin/sed' SHELL='/bin/sh' STRIP='strip' STRIP_FOR_TARGET='$(STRIP)' SYSROOT_CFLAGS_FOR_TARGET='' TOPLEVEL_CONFIGURE_ARGUMENTS='/home/myusername/gcc-temp/gcc-4.6.3/configure --prefix=/home/myusername/opt/gcc-4.6.3 --with-local-prefix=/home/myusername/usr/local' WINDMC='windmc' WINDMC_FOR_BUILD='$(WINDMC)' WINDMC_FOR_TARGET='$(WINDMC)' WINDRES='windres' WINDRES_FOR_BUILD='$(WINDRES)' WINDRES_FOR_TARGET='$(WINDRES)' YACC='bison -y' ac_ct_CC='gcc' ac_ct_CXX='g++' bindir='${exec_prefix}/bin' build='x86_64-unknown-linux-gnu' build_alias='' build_configargs=' --cache-file=../config.cache '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking' build_configdirs=' libiberty fixincludes' build_cpu='x86_64' build_libsubdir='build-x86_64-unknown-linux-gnu' build_noncanonical='x86_64-unknown-linux-gnu' build_os='linux-gnu' build_subdir='build-x86_64-unknown-linux-gnu' build_tooldir='${exec_prefix}/x86_64-unknown-linux-gnu' build_vendor='unknown' clooginc='' clooglibs='' compare_exclusions='gcc/cc*-checksum$(objext) | gcc/ada/*tools/*' config_shell='/bin/sh' configdirs=' intl libiberty zlib libcpp libdecnumber gmp mpfr mpc fixincludes gcc lto-plugin' datadir='${datarootdir}' datarootdir='${prefix}/share' do_compare='cmp --ignore-initial=16 $$f1 $$f2' docdir='${datarootdir}/doc/${PACKAGE}' dvidir='${docdir}' exec_prefix='${prefix}' extra_host_libiberty_configure_flags='--enable-shared' extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/.libs' extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/.libs' gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp -I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr -I$$s/mpc/src ' gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/mpfr/.libs -L$$r/$(HOST_SUBDIR)/mpc/src/.libs -lmpc -lmpfr -lgmp' host='x86_64-unknown-linux-gnu' host_alias='' host_configargs=' --cache-file=./config.cache '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking' host_cpu='x86_64' host_noncanonical='x86_64-unknown-linux-gnu' host_os='linux-gnu' host_subdir='.' host_vendor='unknown' htmldir='${docdir}' includedir='${prefix}/include' infodir='${datarootdir}/info' libdir='${exec_prefix}/lib' libexecdir='${exec_prefix}/libexec' localedir='${datarootdir}/locale' localstatedir='${prefix}/var' mandir='${datarootdir}/man' oldincludedir='/usr/include' pdfdir='${docdir}' poststage1_ldflags='-static-libstdc++ -static-libgcc' poststage1_libs='' pplinc='' ppllibs='' prefix='/home/myusername/opt/gcc-4.6.3' program_transform_name='s,y,y,' psdir='${docdir}' sbindir='${exec_prefix}/sbin' sharedstatedir='${prefix}/com' stage1_cflags='-g -fkeep-inline-functions' stage1_checking='--enable-checking=yes,types' stage1_languages='c,lto' stage1_ldflags='' stage1_libs='' stage2_werror_flag='' sysconfdir='${prefix}/etc' target='x86_64-unknown-linux-gnu' target_alias='' target_configargs='--cache-file=./config.cache --enable-multilib '\''--prefix=/home/myusername/opt/gcc-4.6.3'\'' '\''--with-local-prefix=/home/myusername/usr/local'\'' '\''--enable-languages=c,c++,fortran,java,lto,objc'\'' --program-transform-name='\''s,y,y,'\'' --disable-option-checking' target_configdirs=' libgcc libgomp libstdc++-v3 libmudflap libssp libquadmath libgfortran boehm-gc libffi zlib libjava libobjc' target_cpu='x86_64' target_noncanonical='x86_64-unknown-linux-gnu' target_os='linux-gnu' target_subdir='x86_64-unknown-linux-gnu' target_vendor='unknown' tooldir='${exec_prefix}/x86_64-unknown-linux-gnu' ## ------------------- ## ## File substitutions. ## ## ------------------- ## alphaieee_frag='/dev/null' host_makefile_frag='/dev/null' ospace_frag='/dev/null' serialization_dependencies='serdep.tmp' target_makefile_frag='/home/myusername/gcc-temp/gcc-4.6.3/config/mt-gnu' ## ----------- ## ## confdefs.h. ## ## ----------- ## /* confdefs.h */ #define PACKAGE_NAME "" #define PACKAGE_TARNAME "" #define PACKAGE_VERSION "" #define PACKAGE_STRING "" #define PACKAGE_BUGREPORT "" #define PACKAGE_URL "" #define LT_OBJDIR ".libs/" configure: exit 0 

  • libstdc ++. so.6: open failed: нет такого файла или каталога
  • Swift для Android: `ld` не может найти` -lgcc` в swift для этапа компоновки компиляции android
  • Связывание проблем с libjpeg
  • К чему относятся компиляция и ссылка?
  • установить последнюю версию gcc на rhel 6 x86_64
  • Линейный выход литиевого выхода
  • сбой исходного кода
  • Компилятор C не может создавать исполняемые файлы при создании backport в Debian
  • One Solution collect form web for “gcc 4.6.3 локальная установка с gmp 5.0.5 mpfr 3.1.1 ошибки”

    Если configure говорит, что «MPFR> = 2.4.2 необходимо», вероятно, для этого есть веская причина. Я не уверен, может ли система сборки GCC скомпилировать библиотеки, прежде чем она попытается связать их. Традиционный способ сделать это:

    • создайте необходимые библиотеки и установите их в свой домашний каталог или в его подкаталог, например $HOME/tools (обычно это достигается установкой опции --prefix для скриптов configure ), которая создает дерево bin , include , lib / lib64 и share в целевом каталоге.

    • сообщите сборщику GCC, чтобы использовать библиотеки из вашего предпочтительного каталога, используя параметр --with-mpfr=$HOME/tools для configure . Очевидно, вам придется добавить их для любой библиотеки, которую вы хотите использовать из нестандартного расположения – см. configure --help для всех доступных опций.

    Тонкая настройка LD_LIBRARY_PATH вряд ли поможет вам, так как она только изменяет поведение динамического компоновщика ld.so и он (amlost) всегда смотрит в /lib и /usr/lib в крайнем случае (см. man ld.so для подробного объяснения ).

    В качестве дополнительной заметки вы можете захотеть захватить GCC 4.7.2 вместо старого 4.6.3.

    Interesting Posts

    Как мой скрипт знает, когда я нахожусь в виртуальной консоли против xterm?

    Как включить перенаправление портов, но только для некоторых IP-адресов и блокировки других?

    Как перенести существующую систему Linux в раздел LVM

    Как мне спросить пароль по приглашению GUI при использовании sudo в скрипте?

    Когда exFAT приходит в Linux?

    Настройка пользовательского приложения для сравнения файлов в caja

    Как получать и обрабатывать почту для выполнения команд?

    Относительно приравнивания атрибутов файла в команде «ls»

    Получать электронную почту по электронной почте MAILTO на основе статуса выхода

    Есть ли способ загрузить linux непосредственно из MBR?

    Как изменить конфигурацию детоксикации (тире вместо подчеркивания)?

    Групповая подстановка Sed добавляется в OSX, а не в ожидаемый sub в Linux

    Linux: как перенаправить stdout и stderr в logger?

    bash расширяется до того же значения вместо значения строки за строкой в ​​команде sed

    Что влияет изменение источника clocksource?

    Linux и Unix - лучшая ОС в мире.