Intereting Posts

Не удалось выполнить калибровку сенсорного экрана Samsung Galaxy Book с помощью Xinput

мой сенсорный экран Samsung Galaxy Book обнаружен Ubuntu, но ось перевернута. Я попытался выполнить калибровку с помощью xinput и xinput_calibrator, а затем попытался инвертировать оси с разными координатами (0,1; 0,0) с помощью «Evdev Axis Inversion», но похоже, что Evdev работает с моим сенсорным экраном. Я действительно не знаю, как действовать дальше и буду признателен за любую помощь.

Ниже я вставляю финальный раздел в файл 99-calibration.conf, но не вижу никакого эффекта. Также попытался изменить нули на единицы в SwapXY в этом файле, но не видел никакого эффекта:

$ xinput_calibrator Calibrating standard Xorg driver "STMD1234:00 06CB:1058" current calibration values: min_x=0, max_x=65535 and min_y=0, max_y=65535 If these values are estimated wrong, either supply it manually with the --precalib option, or run the 'get_precalib.sh' script to automatically get it (through HAL). --> Making the calibration permanent <-- copy the snippet below into '/etc/X11/xorg.conf.d/99-calibration.conf' (/usr/share/X11/xorg.conf.d/ in some distro's) Section "InputClass" Identifier "calibration" MatchProduct "STMD1234:00 06CB:1058" Option "MinX" "65359" Option "MaxX" "-267" Option "MinY" "63845" Option "MaxY" "-666" Option "SwapXY" "0" # unless it was already set to 1 Option "InvertX" "0" # unless it was already set Option "InvertY" "0" # unless it was already set EndSection 

Список-реквизит:

 $ xinput --list-props 12 Device 'STMD1234:00 06CB:1058': Device Enabled (137): 1 Coordinate Transformation Matrix (139): 0.000000, -1.000000, 1.000000, 1.000000, 0.000000, 0.000000, 0.000000, 0.000000, 1.000000 libinput Calibration Matrix (309): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 libinput Calibration Matrix Default (310): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 libinput Send Events Modes Available (257): 1, 0 libinput Send Events Mode Enabled (258): 0, 0 libinput Send Events Mode Enabled Default (259): 0, 0 Device Node (260): "/dev/input/event7" Device Product ID (261): 1739, 4184 

Xorg.0.log:

 [ 9.311] (==) No Layout section. Using the first Screen section. [ 9.312] (==) No screen section available. Using defaults. [ 9.312] (**) |-->Screen "Default Screen Section" (0) [ 9.312] (**) | |-->Monitor "<default monitor>" [ 9.317] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. 

 [ 9.495] (II) modeset(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 9.495] (==) modeset(0): Depth 24, (==) framebuffer bpp 32 [ 9.495] (==) modeset(0): RGB weight 888 [ 9.495] (==) modeset(0): Default visual is TrueColor [ 9.495] (II) Loading sub module "glamoregl" [ 9.495] (II) LoadModule: "glamoregl" [ 9.495] (II) Loading /usr/lib/xorg/modules/libglamoregl.so [ 9.568] (II) Module glamoregl: vendor="X.Org Foundation" [ 9.568] compiled for 1.19.3, module version = 1.0.0 [ 9.568] ABI class: X.Org ANSI C Emulation, version 0.4 [ 9.568] (II) glamor: OpenGL accelerated X.org driver based. [ 10.057] (II) glamor: EGL version 1.4 (DRI2): [ 10.105] (II) modeset(0): glamor initialized [ 10.106] (II) modeset(0): Output eDP-1 has no monitor section [ 10.108] (II) modeset(0): Output DP-1 has no monitor section [ 10.109] (II) modeset(0): EDID for output eDP-1 [ 10.109] (II) modeset(0): Printing probed modes for output eDP-1 [ 10.109] (II) modeset(0): Modeline "1280x1920"x60.0 181.56 1280 1340 1364 1441 1920 1935 1937 2100 -hsync -vsync (126.0 kHz P) [ 10.109] (II) modeset(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz d) [ 10.109] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d) [ 10.109] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz d) [ 10.109] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d) [ 10.109] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d) [ 10.109] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d) [ 10.109] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d) [ 10.109] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d) [ 10.109] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d) [ 10.109] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d) [ 10.109] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 10.109] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 10.109] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d) [ 10.109] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d) [ 10.109] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 10.109] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d) [ 10.109] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d) [ 10.109] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d) [ 10.109] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d) [ 10.109] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d) [ 10.109] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d) [ 10.109] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 10.109] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 10.109] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d) [ 10.109] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d) [ 10.109] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d) [ 10.109] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d) [ 10.109] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d) [ 10.109] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d) [ 10.109] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d) [ 10.109] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 10.109] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d) [ 10.109] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d) [ 10.109] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d) [ 10.109] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d) [ 10.109] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d) [ 10.109] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d) [ 10.109] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d) [ 10.111] (II) modeset(0): EDID for output DP-1 [ 10.111] (II) modeset(0): Output eDP-1 connected [ 10.111] (II) modeset(0): Output DP-1 disconnected [ 10.111] (II) modeset(0): Using exact sizes for initial modes [ 10.111] (II) modeset(0): Output eDP-1 using initial mode 1280x1920 +0+0 [ 10.111] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0) [ 10.111] (==) modeset(0): DPI set to (96, 96) [ 10.111] (II) Loading sub module "fb" [ 10.111] (II) LoadModule: "fb" [ 10.111] (II) Loading /usr/lib/xorg/modules/libfb.so [ 10.111] (II) Module fb: vendor="X.Org Foundation" [ 10.111] compiled for 1.19.3, module version = 1.0.0 [ 10.111] ABI class: X.Org ANSI C Emulation, version 0.4 [ 10.111] (II) UnloadModule: "fbdev" [ 10.111] (II) Unloading fbdev [ 10.111] (II) UnloadSubModule: "fbdevhw" [ 10.111] (II) Unloading fbdevhw [ 10.112] (II) UnloadModule: "vesa" [ 10.112] (II) Unloading vesa [ 10.112] (==) Depth 24 pixmap format is 32 bpp [ 10.260] (==) modeset(0): Backing store enabled [ 10.260] (==) modeset(0): Silken mouse enabled [ 10.265] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 10.270] (==) modeset(0): DPMS enabled [ 10.270] (II) modeset(0): [DRI2] Setup complete [ 10.270] (II) modeset(0): [DRI2] DRI driver: i965 [ 10.270] (II) modeset(0): [DRI2] VDPAU driver: i965 [ 10.270] (--) RandR disabled [ 10.276] (II) SELinux: Disabled on system [ 10.282] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 10.282] (II) AIGLX: enabled GLX_ARB_create_context [ 10.282] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 10.282] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 10.282] (II) AIGLX: enabled GLX_INTEL_swap_event [ 10.282] (II) AIGLX: enabled GLX_SGI_swap_control [ 10.282] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 10.282] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 10.282] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 10.282] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 10.282] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 10.282] (II) AIGLX: Loaded and initialized i965 [ 10.282] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 10.293] (II) modeset(0): Damage tracking initialized [ 10.293] (II) modeset(0): Setting screen physical size to 338 x 508 [ 10.423] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 10.423] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 10.423] (II) LoadModule: "libinput" [ 10.423] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so [ 10.459] (II) Module libinput: vendor="X.Org Foundation" [ 10.459] compiled for 1.19.3, module version = 0.25.0 [ 10.459] Module class: X.Org XInput Driver [ 10.459] ABI class: X.Org XInput driver, version 24.1 [ 10.459] (II) Using input driver 'libinput' for 'Video Bus' [ 10.459] (**) Video Bus: always reports core events [ 10.459] (**) Option "Device" "/dev/input/event2" [ 10.459] (**) Option "_source" "server/udev" [ 10.459] (II) input device 'Video Bus', /dev/input/event2 is tagged by udev as: Keyboard [ 10.459] (II) input device 'Video Bus', /dev/input/event2 is a keyboard [ 10.472] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2" [ 10.472] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 10.472] (**) Option "xkb_model" "pc105" [ 10.472] (**) Option "xkb_layout" "us" [ 10.472] (II) input device 'Video Bus', /dev/input/event2 is tagged by udev as: Keyboard [ 10.472] (II) input device 'Video Bus', /dev/input/event2 is a keyboard [ 10.472] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 10.472] (II) No input driver specified, ignoring this device. [ 10.472] (II) This device may have been added with another device file. [ 10.473] (II) config/udev: Adding input device HID 04e8:a00a Touchpad (/dev/input/event6) [ 10.473] (**) HID 04e8:a00a Touchpad: Applying InputClass "libinput touchpad catchall" [ 10.473] (**) HID 04e8:a00a Touchpad: Applying InputClass "touchpad catchall" [ 10.473] (**) HID 04e8:a00a Touchpad: Applying InputClass "Default clickpad buttons" [ 10.473] (II) LoadModule: "synaptics" [ 10.473] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so [ 10.473] (II) Module synaptics: vendor="X.Org Foundation" [ 10.473] compiled for 1.19.3, module version = 1.9.0 [ 10.473] Module class: X.Org XInput Driver [ 10.473] ABI class: X.Org XInput driver, version 24.1 [ 10.473] (II) Using input driver 'synaptics' for 'HID 04e8:a00a Touchpad' [ 10.473] (**) HID 04e8:a00a Touchpad: always reports core events [ 10.473] (**) Option "Device" "/dev/input/event6" [ 10.624] (II) synaptics: HID 04e8:a00a Touchpad: found clickpad property [ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: x-axis range 0 - 1015 (res 12) [ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: y-axis range 0 - 473 (res 12) [ 10.624] (II) synaptics: HID 04e8:a00a Touchpad: device does not report pressure, will use touch data. [ 10.624] (II) synaptics: HID 04e8:a00a Touchpad: device does not report finger width. [ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: buttons: left double triple [ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: Vendor 0x4e8 Product 0xa00a [ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: invalid pressure range. defaulting to 0 - 255 [ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: invalid finger width range. defaulting to 0 - 15 [ 10.624] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0" [ 10.624] (--) synaptics: HID 04e8:a00a Touchpad: touchpad found [ 10.624] (**) HID 04e8:a00a Touchpad: always reports core events [ 10.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:04E8:A00A.0001/input/input7/event6" [ 10.656] (II) XINPUT: Adding extended input device "HID 04e8:a00a Touchpad" (type: TOUCHPAD, id 7) [ 10.656] (**) synaptics: HID 04e8:a00a Touchpad: (accel) MinSpeed is now constant deceleration 2.5 [ 10.656] (**) synaptics: HID 04e8:a00a Touchpad: (accel) MaxSpeed is now 1.75 [ 10.656] (**) synaptics: HID 04e8:a00a Touchpad: (accel) AccelFactor is now 0.179 [ 10.656] (**) HID 04e8:a00a Touchpad: (accel) keeping acceleration scheme 1 [ 10.656] (**) HID 04e8:a00a Touchpad: (accel) acceleration profile 1 [ 10.656] (**) HID 04e8:a00a Touchpad: (accel) acceleration factor: 2.000 [ 10.656] (**) HID 04e8:a00a Touchpad: (accel) acceleration threshold: 4 [ 10.716] (--) synaptics: HID 04e8:a00a Touchpad: touchpad found [ 10.716] (II) config/udev: Adding input device HID 04e8:a00a Touchpad (/dev/input/mouse0) [ 10.716] (**) HID 04e8:a00a Touchpad: Ignoring device from InputClass "touchpad ignore duplicates" [ 10.716] (II) config/udev: Adding input device HID 04e8:a00a (/dev/input/event3) [ 10.716] (**) HID 04e8:a00a: Applying InputClass "libinput keyboard catchall" [ 10.716] (II) Using input driver 'libinput' for 'HID 04e8:a00a' [ 10.716] (**) HID 04e8:a00a: always reports core events [ 10.716] (**) Option "Device" "/dev/input/event3" [ 10.716] (**) Option "_source" "server/udev" [ 10.717] (II) input device 'HID 04e8:a00a', /dev/input/event3 is tagged by udev as: Keyboard [ 10.717] (II) input device 'HID 04e8:a00a', /dev/input/event3 is a keyboard [ 10.732] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:04E8:A00A.0002/input/input3/event3" [ 10.732] (II) XINPUT: Adding extended input device "HID 04e8:a00a" (type: KEYBOARD, id 8) [ 10.732] (**) Option "xkb_model" "pc105" [ 10.732] (**) Option "xkb_layout" "us" [ 10.732] (II) input device 'HID 04e8:a00a', /dev/input/event3 is tagged by udev as: Keyboard [ 10.732] (II) input device 'HID 04e8:a00a', /dev/input/event3 is a keyboard [ 10.732] (II) config/udev: Adding input device HID 04e8:a00a (/dev/input/event4) [ 10.732] (**) HID 04e8:a00a: Applying InputClass "libinput keyboard catchall" [ 10.732] (II) Using input driver 'libinput' for 'HID 04e8:a00a' [ 10.732] (**) HID 04e8:a00a: always reports core events [ 10.732] (**) Option "Device" "/dev/input/event4" [ 10.732] (**) Option "_source" "server/udev" [ 10.733] (II) input device 'HID 04e8:a00a', /dev/input/event4 is tagged by udev as: Keyboard [ 10.733] (II) input device 'HID 04e8:a00a', /dev/input/event4 is a keyboard [ 10.756] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:04E8:A00A.0003/input/input4/event4" [ 10.756] (II) XINPUT: Adding extended input device "HID 04e8:a00a" (type: KEYBOARD, id 9) [ 10.756] (**) Option "xkb_model" "pc105" [ 10.756] (**) Option "xkb_layout" "us" [ 10.756] (II) input device 'HID 04e8:a00a', /dev/input/event4 is tagged by udev as: Keyboard [ 10.756] (II) input device 'HID 04e8:a00a', /dev/input/event4 is a keyboard [ 10.756] (II) config/udev: Adding input device WCOM0028:00 2D1F:000C (/dev/input/event8) [ 10.756] (**) WCOM0028:00 2D1F:000C: Applying InputClass "libinput pointer catchall" [ 10.756] (**) WCOM0028:00 2D1F:000C: Applying InputClass "libinput tablet catchall" [ 10.756] (II) Using input driver 'libinput' for 'WCOM0028:00 2D1F:000C' [ 10.756] (**) WCOM0028:00 2D1F:000C: always reports core events [ 10.756] (**) Option "Device" "/dev/input/event8" [ 10.756] (**) Option "_source" "server/udev" [ 10.864] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is tagged by udev as: Mouse Tablet [ 10.877] (II) WCOM0028:00 2D1F:000C: tablet unknown to libwacom [ 10.877] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is a tablet [ 10.928] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.3/i2c-8/i2c-WCOM0028:00/0018:2D1F:000C.0005/input/input17/event8" [ 10.928] (II) XINPUT: Adding extended input device "WCOM0028:00 2D1F:000C" (type: TABLET, id 10) [ 10.929] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is tagged by udev as: Mouse Tablet [ 10.933] (II) WCOM0028:00 2D1F:000C: tablet unknown to libwacom [ 10.933] (II) input device 'WCOM0028:00 2D1F:000C', /dev/input/event8 is a tablet [ 10.934] (II) config/udev: Adding input device WCOM0028:00 2D1F:000C (/dev/input/mouse2) [ 10.934] (II) No input driver specified, ignoring this device. [ 10.934] (II) This device may have been added with another device file. [ 10.934] (II) config/udev: Adding input device Intel Virtual Button driver (/dev/input/event5) [ 10.934] (**) Intel Virtual Button driver: Applying InputClass "libinput keyboard catchall" [ 10.934] (II) Using input driver 'libinput' for 'Intel Virtual Button driver' [ 10.934] (**) Intel Virtual Button driver: always reports core events [ 10.934] (**) Option "Device" "/dev/input/event5" [ 10.934] (**) Option "_source" "server/udev" [ 10.934] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is tagged by udev as: Keyboard [ 10.934] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is a keyboard [ 10.960] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/INT33D6:00/input/input5/event5" [ 10.960] (II) XINPUT: Adding extended input device "Intel Virtual Button driver" (type: KEYBOARD, id 11) [ 10.960] (**) Option "xkb_model" "pc105" [ 10.960] (**) Option "xkb_layout" "us" [ 10.960] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is tagged by udev as: Keyboard [ 10.960] (II) input device 'Intel Virtual Button driver', /dev/input/event5 is a keyboard [ 10.960] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event9) [ 10.960] (II) No input driver specified, ignoring this device. [ 10.960] (II) This device may have been added with another device file. [ 10.960] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10) [ 10.960] (II) No input driver specified, ignoring this device. [ 10.960] (II) This device may have been added with another device file. [ 10.960] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11) [ 10.961] (II) No input driver specified, ignoring this device. [ 10.961] (II) This device may have been added with another device file. [ 10.961] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12) [ 10.961] (II) No input driver specified, ignoring this device. [ 10.961] (II) This device may have been added with another device file. [ 10.961] (II) config/udev: Adding input device STMD1234:00 06CB:1058 (/dev/input/event7) [ 10.961] (**) STMD1234:00 06CB:1058: Applying InputClass "libinput touchscreen catchall" [ 10.961] (**) STMD1234:00 06CB:1058: Applying InputClass "calibration" [ 10.961] (II) Using input driver 'libinput' for 'STMD1234:00 06CB:1058' [ 10.961] (**) STMD1234:00 06CB:1058: always reports core events [ 10.961] (**) Option "Device" "/dev/input/event7" [ 10.961] (**) Option "_source" "server/udev" [ 10.963] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is tagged by udev as: Touchscreen [ 10.963] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is a touch device [ 10.992] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3446:00/i2c_designware.0/i2c-5/i2c-STMD1234:00/0018:06CB:1058.0004/input/input12/event7" [ 10.992] (II) XINPUT: Adding extended input device "STMD1234:00 06CB:1058" (type: TOUCHSCREEN, id 12) [ 10.992] (**) Option "AccelerationScheme" "none" [ 10.992] (**) STMD1234:00 06CB:1058: (accel) selected scheme none/0 [ 10.992] (**) STMD1234:00 06CB:1058: (accel) acceleration factor: 2.000 [ 10.992] (**) STMD1234:00 06CB:1058: (accel) acceleration threshold: 4 [ 10.994] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is tagged by udev as: Touchscreen [ 10.994] (II) input device 'STMD1234:00 06CB:1058', /dev/input/event7 is a touch device [ 10.994] (II) config/udev: Adding input device STMD1234:00 06CB:1058 (/dev/input/mouse1) [ 10.994] (**) STMD1234:00 06CB:1058: Applying InputClass "calibration" [ 10.994] (II) No input driver specified, ignoring this device. [ 10.994] (II) This device may have been added with another device file. [ 10.994] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1) [ 10.994] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall" [ 10.994] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard' [ 10.994] (**) AT Translated Set 2 keyboard: always reports core events [ 10.994] (**) Option "Device" "/dev/input/event1" [ 10.994] (**) Option "_source" "server/udev" [ 10.994] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is tagged by udev as: Keyboard [ 10.994] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is a keyboard [ 11.008] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1" [ 11.008] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13) [ 11.008] (**) Option "xkb_model" "pc105" [ 11.008] (**) Option "xkb_layout" "us" [ 11.008] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is tagged by udev as: Keyboard [ 11.008] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event1 is a keyboard [ 18.638] (II) modeset(0): Allocate new frame buffer 1920x1280 stride [ 993.389] (II) libinput: WCOM0028:00 2D1F:000C: needs a virtual subdevice [ 993.389] (**) WCOM0028:00 2D1F:000C Pen (0): Applying InputClass "libinput pointer catchall" [ 993.389] (**) WCOM0028:00 2D1F:000C Pen (0): Applying InputClass "libinput tablet catchall" [ 993.389] (II) Using input driver 'libinput' for 'WCOM0028:00 2D1F:000C Pen (0)' [ 993.389] (**) WCOM0028:00 2D1F:000C Pen (0): always reports core events [ 993.390] (**) Option "Device" "/dev/input/event8" [ 993.390] (**) Option "_source" "_driver/libinput" [ 993.390] (II) libinput: WCOM0028:00 2D1F:000C Pen (0): is a virtual subdevice [ 993.390] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:15.1/i2c_designware.3/i2c-8/i2c-WCOM0028:00/0018:2D1F:000C.0005/input/input17/event8" [ 993.390] (II) XINPUT: Adding extended input device "WCOM0028:00 2D1F:000C Pen (0)" (type: STYLUS, id 14) [ 993.390] (**) Option "AccelerationScheme" "none" [ 993.390] (**) WCOM0028:00 2D1F:000C Pen (0): (accel) selected scheme none/0 [ 993.390] (**) WCOM0028:00 2D1F:000C Pen (0): (accel) acceleration factor: 2.000 [ 993.390] (**) WCOM0028:00 2D1F:000C Pen (0): (accel) acceleration threshold: 4